| English [German version see below] ------------------------ ----------- Contents: - PMC Board for CAN with High- and Low-Speed Bus Interface - Wireless CAN - CAN access via Bluetooth with CANblue - New version of the CANcheck - Training classes in autumn 2007 ----------- PMC Board for CAN with High- and Low-Speed Bus Interface With the new iPC-I XC16/PMC IXXAT offers a CAN interface which was specially developed to cover demanding CAN applications like industrial control or automotive test stand. The interface supports the 32-bit PMC bus and can be used in 5 V and 3.3 V systems. Some of the features offered by the on-board 16 bit microcontroller include filtering, pre-processing, low latency, time triggered transmission or high precision time-stamping of CAN messages. The interface can also be used as Master device in CANopen systems with a large number of nodes. Both CAN channels can be switched between high- and low-speed CAN via software and have a galvanic isolation. In combination with the CAN driver (VCI, part of delivery), the iPC-I XC16/PMC allows for the seamless integration of PC-supported CAN applications. In addition, the iPC-I XC16/PMC is well-suited for use with the IXXAT analysis and configuration tools. --- Wireless CAN - CAN access via Bluetooth with CANblue With the CANblue interface, IXXAT offers a universal CAN module which enables the wireless communication among CAN systems as well as between a CAN system and a PC. The module is offered as VCI version, delivered with the VCI driver for Windows to enable the connection of a Windows PC to a CAN system, and a Generic version with an open programming interface and bridge functionality. The open programming interface makes the module very attractive for customer-specific service and control applications that want to access the CANblue, for example by means of PDA or via embedded systems. Using two CANblue/Bridges, a CAN-Bluetooth-CAN bridge can be implemented. This bridge enables the exchange of CAN messages between two CAN systems via Bluetooth, where filters for CAN identifiers can be defined and saved by the user. The CANblue is connected to the CAN bus with an SJA1000 CAN controller. The bus interface can be switched via software between ISO/IS 11898-2 (high-speed) and ISO/IS 11898-3 (low-speed). --- New version of the CANcheck CANcheck allows the simple test of CAN networks during start-up, troubleshooting and maintenance. The scope of supply includes a variety of tests, such as a wiring test when the network is switched off, a test of the resistances between all pins of the CAN connector, a termination resistance test and the determination of the cable length. In addition, the signal level, the baud rate and the bus load can be determined during operation of the network. All identifiers transmitted in a system can be scanned and displayed. It is also possible to display the error frames received per time unit. The new version of the CANcheck allows the storage of the results of up to four measurement cycles and offers a plausibility check for the measured values. Further new features are the display of message identifiers in hexadecimal and decimal format, the extended range of supported baud rates as well as the detection of the bus length by means of the signal speed. Customers who use the CANcheck already can make an update free of charge. The required firmware update can be downloaded from the IXXAT webpage. --- Training classes in autumn 2007 For developers of CAN and Ethernet based communication solutions the following training classes are offered in autumn: CAN seminar: October 23-24, 2007 http://www.ixxat.de/can-seminar_en.html CANopen seminar: October 25-26, 2007 http://www.ixxat.de/canopen-seminar_en.html DeviceNet seminar: October 09-10, 2007 http://www.ixxat.de/devicenet-seminar_en.html EtherNet/IP seminar: October 11-12, 2007 http://www.ixxat.de/ethernet_ip-seminar_en.html Powerlink seminar: November 08-09, 2007 http://www.ixxat.de/ethernet_powerlink-seminar_en.html FlexRay workshop: November 07, 2007 http://www.ixxat.de/flexray_workshop_en.html With the seminars, the participants receive a quick, efficient introduction to the technology. The seminars are particularly intended for developers and system designers who have to implement their own developments and want to acquire foundational knowledge of the technology. The seminars are presented in German language at IXXAT in Weingarten (English classes upon request). In addition we offer In-House seminars in English language. ----------- German [English version see above] ------------------------ ----------- Inhalte: - PMC-Karte für CAN mit High- und Low-Speed-Interface - Wireless CAN - Mit dem CANblue über Bluetooth an CAN - Neue Version des CANcheck - Seminare im Herbst 2007 ----------- PMC-Karte für CAN mit High- und Low-Speed-Interface Mit der neuen iPC-I XC16/PMC bietet IXXAT eine CAN-Interfacekarte an, die speziell für anspruchsvolle Applikationen wie Industrie-Steuerungen oder Automobil-Prüfstände entwickelt wurde. Die Karte unterstützt den 32-Bit PMC-Bus und kann in Systemen mit 5 V und 3,3 V eingesetzt werden. Mit ihrem 16-Bit-Mikrocontrollersystem kann die Karte Sende- und Empfangsvorgänge niedriger Latenz auf bis zu zwei CAN-Kanälen auch in CAN-Netzwerken mit hoher Übertragungsrate und hoher Buslast verlustfrei zu steuern. Ebenso kann die Karte als Master für CANopen-Systeme eingesetzt werden. Beide CAN-Kanäle der Karte können per Software zwischen High-Speed- und Low-Speed umgeschaltet werden und sind standardmäßig galvanisch isoliert. Der im Lieferumfang enthaltene CAN-Treiber "VCI" ermöglicht die einfache Entwicklung von PC-gestützten CAN-Anwendungen. In Verbindung mit dem von IXXAT angebotenen canAnalyser erhält man ein äußerst leistungsfähiges Mehrkanal-Analyse- und Entwicklungswerkzeug. --- Wireless CAN - Mit dem CANblue über Bluetooth an CAN IXXAT bietet mit seinem CANblue ein universelles CAN-Modul an, welches die drahtlose Kommunikation unter CAN-Systemen sowie zwischen CAN-System und PC ermöglicht. Das Modul steht in einer VCI-Version, die mit dem VCI CAN-Treiber für Windows ausgeliefert wird und die Anbindung eines Windows PCs an den CAN-Bus ermöglicht, und einer Generic-Version mit offener Programmierschnittstelle und Bridge-Funktionalität zur Verfügung. Die offene Programmierschnittstelle macht das CANblue besonderst interessant für kundenspezifische Service- und Steuerungsanwendungen, die z. B. mittels PDA oder über Embedded-Systeme auf das CANblue zugreifen wollen. Unter Verwendung von zwei CANblue/Bridge lässt sich eine CAN-Bluetooth-CAN-Bridge realisieren. Diese Bridge ermöglicht den Austausch von CAN-Nachrichten zwischen zwei CAN-Systemen über Bluetooth, wobei Filter für CAN-Identifier vom Anwender definiert und hinterlegt werden können. Die Anbindung an den CAN-Bus erfolgt über einen SJA1000 CAN-Controller. Das Businterface ist hierbei per Software zwischen ISO/IS 11898-2 (High-Speed) und ISO/IS11898-3 (Low-Speed) umschaltbar. --- Neue Version des CANcheck Der CANcheck ermöglicht den einfachen Test von CAN-Netzwerken bei der Inbetriebnahme, Fehlersuche und Wartung. Der Funktionsumfang umfasst alle für den Test und die Inbetriebnahme von CAN-Systemen wichtigen Prüfungen, wie einen Kabeltest bei ausgeschaltetem Netzwerk, den Test der Widerstände zwischen allen Pins des CAN-Steckers, einen Abschlusswiderstandstest sowie die Ermittlung der Kabellänge. Ferner kann der Signalpegel, die Baudrate und die Buslast eines Systems im laufenden Betrieb ermittelt werden. Alle in einem System übertragenen Identifier können gescannt und angezeigt werden. Hierbei ist auch eine Anzeige der empfangenen Error-Frames pro Zeiteinheit möglich. Die aktuelle Version des CANcheck ermöglicht darüber hinaus die Speicherung der Ergebnisse von bis zu vier Messreihen sowie die Plausibilitätsprüfung der Ergebnisse. Weitere Neuerungen sind die Anzeige von Identifiern im hexadezimalen oder dezimalen Format, die Erweiterung der unterstützten Baudraten sowie die Bestimmung der Leitungslänge anhand der Signalgeschwindigkeit. Kunden, die den CANcheck bereits einsetzen, können diesen kostenlos auf die aktuelle Version updaten. Die entsprechende Update-Datei steht auf der IXXAT-Webseite zum Download bereit. --- Seminare im Herbst 2007 Für Entwickler von CAN- und Ethernet-basierenden Kommunikationslösungen bietet IXXAT im Herbst die folgenden Seminare an: CAN-Seminar: 23.-24. Oktober 2007 http://www.ixxat.de/can-seminar_de.html CANopen-Seminar: 25.-26. Oktober 2007 http://www.ixxat.de/canopen-seminar_de.html DeviceNet-Seminar: 09.-10.Oktober 2007 http://www.ixxat.de/devicenet-seminar_de.html EtherNet/IP-Seminar: 11.-12. Oktober 2007 http://www.ixxat.de/ethernet_ip-seminar_de.html Powerlink-Seminar: 08.-09. November 2007 http://www.ixxat.de/ethernet_powerlink-seminar_de.html FlexRay-Workshop: 07. November 2007 http://www.ixxat.de/flexray_workshop_de.html Mit den Seminaren erhalten die Teilnehmer einen schnellen und effizienten Einstieg in die entsprechenden Technologien. Die Seminare sind für Entwickler und Systemdesigner gedacht, die Entwicklungen realisieren müssen und sich fundierte Grundkenntnisse aneignen wollen. Die Seminare werden bei IXXAT in Weingarten in deutscher Sprache gehalten. Zusätzlich bieten wir auch In-House-Seminare in englischer Sprache an. |